Features and Functions
Provide 1, 2, 5,5 and 11 Mbps wireless connectivity to the Access point
Use Direct Sequence Spread Spectrum ( DSSS ) technology and implement DBPSK, DQPSK
and CCK modulation
Auto fallback data rate 11, 5.5, 2 and 1Mbps under noisy environment
Full implementation of the MAC protocol specified IEEE standards 802.11-1999 and 802.11b
Internal Encryption Engine executes IEEE802.11 WEP
Firmware image downloaded to card each time driver is loaded
Encryption engine supporting up to 128-bit wire equivalent privacy ( WEP )
PC Card interface supports full 16-bit implementation
Support Two Internal Antenna
Low power consumption
Automatic power management to reduce battery use
Operation Modes
Ad-hoc mode
Infrastructure mode
PCMCIA Specification
PCMCIA V2.1 standard
16-bit Type II PC Card
Plug and Play
Security
Support SSID network identification for security
Support 64-bit and 128-bit WEP Data Encryption and Decryption
40-bit key plus 24-bit Initialization Vector
104-bit key plus 24-bit Initialization Vector
RF Specification
Transmit Power : 15dBm +/- 2dBm
Receive sensitivity : -80dBm at 11Mbps with FER < 8%
Frequency range : 2400MHz to 2484MHz
Frequency stability : within 25KHz of nominal value
Nominal antenna port impedance : 50O
Media Access Protocol : CSMA / CA with ACK
Modulation technique : DSSS ( Direct Sequence Spread Spectrum )
CCK ( 11 Mbps and 5.5 Mbps )
DQPSK ( 2 Mbps )
DBPSK ( 1 Mbps )
Spreading : 11-chip Barker sequence
International Channel Frequencies: FCC > 1 to 11
ETSI > 1 to 13
Japan > 1 to 14
General Specification
Operation Voltage : 5V
Power Consumption (Maximum)
- Transmit mode : 240mA
- Received mode : 170mA
Environment parameter
Operating temperature : 32° to 131°F (0° to 50°C)
Storage temperature : -40° to 158°F (-40° to 70°C) storage
Operating Humidity : 10% to 80% (at 104°F/40°C)
Certifications
FCC part 15
CE-EMC
CE-LVD
JATE (option)
VCCI class 2 (option)
WiFi (option)
WiFi5 (option)
TELEC (option)
Operating OS
Windows 98 second edition, Windows ME, Windows 2K and Windows XP
Outside description
LED 1 ( Green ) : System ready
LED 2 ( Green ) : Link success
System Requirements
PC, Pentium-class, 300MHz or better recommended
64 Mbytes recommended
Hard disk space at least 30 Mbytes
PCMCIA slot driver |
.jpg)
Price:
Schließen Sie bitte an uns anbuy driver |