+ Product Search + Keyword:       Touch POS System ST150 ATOM TouchPOS ST T2-CDC TouchPOS ST D series TouchPOS ST F Fanless ST8000 KIOSK SB FBOX     Touch Monitor TM120/150/170/190 SCM120 SCM100 SCM150/170/190     Receipt Printer TM200PLUS TM200     Customer Display VFD-220D VFD-550D     Cash Drawer LV-C200     Touch Componet 4 Wire Resistive Touch Panel 5 Wire Resistive Touch Panel Resistive Touch Controller     Megnetic Card Reader MSR-123   4 Wire Resistive Touch Panel 4-Wire resistive touch screen is the preferred solution for low cost applications. It consists of a conductive bottom layer (ITO Glass or Film) and a conductive top layer (ITO Film). The two layers are suspended by many very small spacer dots. When a certain point is touched, the top layer contacts the bottom layer and a voltage charged by the controller is applied to the bottom layer's electrodes. The coordinate X axis of the touch point can be detected by measuring the voltage value thru the top ITO layer and the coordinate Y axis of the touch point can be detected in the same way by changing voltage input to the top layer's electrodes Specificaiton : 1.Surface Hardness: 3H 2. Optical Clarity: 80 % 3 Operating Temperature : -10C ~ 60C 4 Endurance Test strikes : Over 1 million 5 Operating Voltage : DC5V 6 Resistance: 200 Om ~ 900 Om 7 Linearity : <1.5% 8 Faceplate Surface : Anti-glare coating 9 Operation Pressure : 15 ~ 70g 10 Storage Temperature : 20C ~ 70C 11 Message Noise : 5 m sec ~ 15 m sec 12 Operating Current : 5mA ~ 25mA 13 Isolation Resistance : 20M Om and up at DC25V detailprice: Please connect with us   5 Wire Resistive Touch Panel 5-Wire resistive touch screen is the preferred solution for applications requiring durability and reliability over time. Similar to the 4-Wire technology, 5-Wire touch screen also consists of a conductive bottom layer (ITO Glass or ITO Film) and a conductive top layer (ITO Film). The fundamental structure difference between the two is: in the 5-wire technology, all the electrodes are placed on the bottom layer and the top layer acts only as a voltage measuring probe. Therefore, the touch screen works properly even with damages or scratches on the top layer ================================ Specification 1.Surface Hardness : 3H 2. Optical Clarity: 80 and up 3 Operating Temperature : -10C ~ 60C 4 Endurance Test strikes : Over 10 million 5 Operating Voltage: DC5V 6 Resistance: 30 Om~ 300 Om 7 Linearity : <1.5% 8 Faceplate Surface : Anti-glare coating 9 Operation Pressure : 15 ~ 70g 10 Storage Temperature: 20C ~ 70C 11 Message Noise: 5 m sec ~ 15 m sec 12 Operating Current: 5mA ~ 25mA 13 Isolation Resistance: 20M Om at DC25V 14 Total thickneww :1.4mm or 2.1mm detailprice: Please connect with us   Resistive Touch Controller Hardware Specifications Power Requirements +5VDC (max. 100mA, typical 70mA, 50mV peak to peak max ripple) Operating Temperature 0 to 50 degrees Centigrade Storage Temperature -40 to 80 degrees Centigrade Relative Humidity 95% at 60 degrees Centigrade Protocol 1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit 2. USB: USB 1.1 Low speed 3. PS/2: PS/2 mouse Resolution 2048 x 2048 Accuracy Tolerance Max. +/- 0.5% tolerance Report Rate 1. RS232: Max. 160 points/sec 2. USB: Max. 160 points/sec 3. PS2: Max. 140 points/sec Response Time Max. 35 ms Regulatory Approvals FCC-B, CE Panel Resistance 4w 200 ~ 900 ohm (pin to pin on the same layer) 5w 50 ~ 900 ohm (pin to pin on the same layer, touch resistance under 2k ohm ) ======================================================= Software Features ( TouchKit ) Calibration Fast Full oriental 4 points position Compensation 1. Accuracy 25 points linearity position 2. Edge compensation Draw Test Position and linearity verification Controller Setting 1. Support multiple controllers 2. Dynamical add/ remove controllers 3. Change controller interface without reboot Languages Support 10 languages for Windows Mouse Emulator 1. Right/ left button emulation 2. Click/ drawing mode Sound Notification 1. No sound 2. Touch down 3. Touch up Double Click 1. Configurable double click speed 2. Configurable double click area OS Support 1. Windows 95/ 98/ ME/ NT4/ 2000/ XP/ XP Tablet PC edition 2. Windows CE 2.12/ 3.0/ .net(4.0, 5.0) 3. Linux (up to Kernel 2.6) 4. MS-DOS: support display resolution: 320x200, 640x200, 640x350, 640x480, 800x600, 1024x768 and 1280x1024 5. Mac 9.0/ OS X ( Power PC, Intel CPU ) COM Port Support 1. Support COM1~COM256 for Windows and Linux 2. Support COM1~COM8 for DOS Display Support 1. Support monitor/ display rotation 2. Support multiple monitors 3. Support split monitor detailprice: Please connect with us   Lava Technology Inc. Tel: +1-626-2548923 E-MAIL：lavatechnology@yahoo.com